Add build information into a Yocto image

From KoanSoftware Wiki
Revision as of 10:31, 26 June 2024 by Koan (talk | contribs) (→‎Creating Add build information into a Yocto image)

Jump to: navigation, search

Creating Add build information into a Yocto image

Importing variables into the device with buildinfo

There is a little known image feature in Yocto called buildinfo that will help us get the required information.

Buildinfo is available in Yocto 1.8 and later versions. This image feature will write a set of OpenEmbedded variables to a file /etc/build in the image, which in turn gets written to the target device.

To enable buildinfo, open conf/local.conf and append 

INHERIT += "image-buildinfo"
IMAGE_BUILDINFO_VARS:append = " DATETIME DISTRO_NAME IMAGE_BASENAME MACHINE TUNE_PKGARCH" 
IMAGE_BUILDINFO_VARS:append = " MACHINE_FEATURES DISTRO_FEATURES COMMON_FEATURES IMAGE_FEATURES"
IMAGE_BUILDINFO_VARS:append = " TUNE_FEATURES TARGET_FPU"

Then build the desired image, e.g. with bitbake -k core-image-minimal. And run the image, e.g. with runqemu qemuarm nographic, and look at the file generated in /etc/build.

A sample resulting /etc/build file is shown below. 

-----------------------
Build Configuration:  |
-----------------------
DISTRO = poky
DISTRO_VERSION = 4.0.19
DATETIME = 20240626102217
DISTRO_NAME = Poky (Yocto Project Reference Distro)
IMAGE_BASENAME = core-image-minimal
MACHINE = qemuarm
TUNE_PKGARCH = cortexa15t2hf-neon
MACHINE_FEATURES = alsa bluetooth usbgadget screen vfat rtc qemu-usermode
DISTRO_FEATURES = acl alsa argp bluetooth debuginfod ext2 ipv4 ipv6 largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 vfat seccomp largefile opengl ptest multiarch wayland vulkan pulseaudio sysvinit gobject-introspection-data ldconfig
COMMON_FEATURES = 
IMAGE_FEATURES = debug-tweaks package-management ssh-server-openssh
TUNE_FEATURES = arm vfp cortexa15 neon thumb callconvention-hard
TARGET_FPU = hard
-----------------------
Layer Revisions:      |
-----------------------
meta              = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df 
meta-poky         = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df 
meta-yocto-bsp    = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df 
meta-oe           = kirkstone:0560b848996a0feb410a8cd8ca07c60fe2f3b5bc


Buildhistory

To enable buildhistory, open conf/local.conf and append 

INHERIT += "buildhistory"
BUILDHISTORY_COMMIT = "1"

The same details are registered on the HOST for every build when you enable buildhistory 

commit 3c194a01ee722b94f474c7911ccb926ee2858639 (HEAD -> master)
Author: buildhistory <buildhistory@poky>
Date:   Wed Jun 26 10:22:52 2024 +0000

   Build 20240626102217 of poky 4.0.19 for machine qemuarm on koanserver
   
   cmd: bitbake core-image-minimal
   
   result: succeeded
   
   metadata revisions:
   meta              = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df
   meta-poky         = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df
   meta-yocto-bsp    = kirkstone:e139e9d0ce343ba77a09601a976c92acd562c9df
   meta-oe           = kirkstone:0560b848996a0feb410a8cd8ca07c60fe2f3b5bc
Retrieved from "https://wiki.koansoftware.com/index.php?title=Add_build_information_into_a_Yocto_image&oldid=355"