Difference between revisions of "Setup an external toolchain with Yocto"
From KoanSoftware Wiki
(Created page with "You can use the sourcery g++ toolchain, but it requires custom tuning arguments to control selection of the multilib in the external toolchain sysroots, so you should switch to a…") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
If you want to see an example of external toolchain stuff that works, see the [https://github.com/MentorEmbedded/meta-sourcery meta-sourcery] layer. | If you want to see an example of external toolchain stuff that works, see the [https://github.com/MentorEmbedded/meta-sourcery meta-sourcery] layer. | ||
| + | |||
| + | Watch this presentation about [http://www.youtube.com/watch?v=FZpKbSHRJro how to setup an external toolchain with oe-core]. | ||
| + | |||
| + | |||
| + | * Example with Linaro toolchain | ||
| + | |||
| + | # | ||
| + | # Setting the following variables will enable the use of the Linaro toolchain. If not set | ||
| + | # you will build using gcc built by Yocto. EXTERNAL_TOOLCHAIN must be set to the path | ||
| + | # where the linaro toolchain exists and should have subdirectories named lib, bin, etc | ||
| + | # | ||
| + | |||
| + | TCLIBC = "external-linaro-toolchain" | ||
| + | TCMODE = "external-linaro" | ||
| + | EXTERNAL_TOOLCHAIN = "/home/koan/altera-linux/linaro/gcc-linaro-arm-linux-gnueabihf-4.7-2012.11-20121123_linux" | ||
Latest revision as of 13:15, 4 June 2013
You can use the sourcery g++ toolchain, but it requires custom tuning arguments to control selection of the multilib in the external toolchain sysroots, so you should switch to a separate layer and override the tuning files in question.
For example.
If you want to see an example of external toolchain stuff that works, see the meta-sourcery layer.
Watch this presentation about how to setup an external toolchain with oe-core.
- Example with Linaro toolchain
# # Setting the following variables will enable the use of the Linaro toolchain. If not set # you will build using gcc built by Yocto. EXTERNAL_TOOLCHAIN must be set to the path # where the linaro toolchain exists and should have subdirectories named lib, bin, etc # TCLIBC = "external-linaro-toolchain" TCMODE = "external-linaro" EXTERNAL_TOOLCHAIN = "/home/koan/altera-linux/linaro/gcc-linaro-arm-linux-gnueabihf-4.7-2012.11-20121123_linux"
